Skip to main content

An Overview of Dental Implants

Replacing the “void” with dental implants is the quality of care in the US for missing teeth. Usually, the implants are made of titanium and are mounted in the jaw to support a tooth or a few teeth. The implant of titanium will osseointegrate into the jaw. This ensures that the bone from the jaw will expand into the sides of the titanium implant, making it very secure in terms of stability. For more details click Murfreesboro Dental Office.

Drilling into the bone is performed during the insertion of a dental implant, taking extra precautions to avoid nerves that are near by, such as the inferior alveolar nerve. During drilling, irrigation is usually used to avoid overheating.

It is possible to use dental implants to replace a single tooth or to sustain a full dental bridge, or to replace a complete set of teeth. “Root type,” also referred to as “endosteal” implants, are the most common form of dental implants. For those with a strong and safe jawbone, the shape of the implant resembles the natural root of the tooth and is perfect. A bone graft may be used if a patient does not have enough bone for implant placement.

A plate-form implant is another type of dental implant that is used where the jaw is small and bone grafting is inappropriate. For placement with a second stage required to allow for initial healing, traditional surgery is used.

A subperiosteal dental implant could be the next best choice if the patient does not have ample bone for either a root form or plate form implant. They have a higher rate of failure and a greater cost, so this should be taken into account. It is a personalised implant with a 3-d model built from an individual CT scan or dental impression.

Mini-dental implants are one of the more recent developments. They are smaller variants of implants for the root type. Originally, the choice was to use them for temporary implants, but, especially for those with smaller teeth, they have become a permanent implant option. As with the larger models, they do not fuse to bone as well, but can have an efficient long-lasting solution and be cheaper.

There are periods when patients may have their dental implants installed in a single stage environment as newer techniques advance. The reasons for this evolution are that the 3d modelling technologies are in-house in some dental practises and do not need to outsource anything. Another theory is that now there are firms that can model it for the same stage placement. Via 3d modelling, the patient will then have all the pre-procedure work done and the implant fashioned and ready to go during the single stage procedure. To see what’s available, consult with your nearest dental implant specialist.