If you have children or there are children in your neighbourhood, you can be sure that you’re going to have to think about this kind of garage door repair sooner or later. The good news is that it’s fairly straightforward to fix broken glass in a wooden frame and you can get things finished really quickly. However there is one important thing to remember: you must ensure that you wear gloves at all times so that you are not injured.You may want to check out Jacob’s Garage Door Repair for more.
Start from the outside
Start with removing the outside of the loose pieces of glass. You would have to use a putty knife to remove the glazing compound around the edge to get rid of all the bits. For this reason, you could use a small chisel as well. Try heating it with a heat gun or a blow dryer in case this doesn’t work. You could add some linseed oil if none of these methods work, and let it set to soften the glazing.
Remove the whole of the bottle
You should remove all the glass bits until the glazing has softened. Make sure you remove the rest of the putty and paint from the frame as well. Otherwise the new products will not adhere to the floor. Clean it up. You should prime it to protect it against the elements if there is any wood left bare.
Size matters in fixing garage doors
Measure the opening height and width of the window, and deduct 0.125 inches from both of them. To measure the thickness of the bottle, then move on. Once you have all this data, just go to the glass shop or home improvement store to get a new screen.
The glass case
Before you start working, ensure that the primer you applied has dried. To make a thin chain, use a glazing compound and press it into the frame. Put the new pane in its place and press it around the edges gently. You will ensure that the glass sticks to the glazing in this way. To assist you, you can use a putty knife. Although you have to apply some pressure, make sure you don’t break the glass because it’s not too much.